DOP回收熱交換器
蒸氣熱交換器
彎管式熱媒熱熱交換器
●適用範圍：任何須氣體加熱或冷卻、冷凝之產業，舉凡電子、塑化、食品、
染整、塗膠、造紙、環保、溶劑回收、廢熱回收、馬達冷卻系統
、空調等產業設備。如VOC冷凝器、DOP回收、乾燥爐、烘乾機
、塗佈機、發泡機、植絨機、手套機、樹脂定型機、焚化爐、冰
水盤管、蒸汽盤管等機器。
●特性：藉由鰭片散熱管將高溫流體取出熱，把低溫流體加熱，鰭片纏繞固定
在傳熱管上增加傳熱管表面積，乃螺旋式。若用模具沖片成形再用漲
管方式固定，乃沖片平板式。兩者皆是增加傳熱表面積。達到流體與
流體間熱交換的方式，加上鰭片可減少整個熱交換器的體積，唯須視
用途而定。一般可分為加熱（熱源為蒸汽或熱媒油，即空氣加熱得到
熱風乾燥原物料，或將熱媒油、蒸汽冷卻用）及冷卻（冷源為水或冰
水，冷媒達到空氣冷卻、冷凝之目的）。
●規格：沖片平板式：管徑：5/8ø
管孔間距：38.1×33(mm)
材質：紫銅管、不銹鋼管
鰭片：厚度：0.15~0.25(mm)
材質：鋁片、銅片、不銹鋼片、銅片鍍錫
螺旋式：鰭片厚度：0.3~0.4(mm)
材質：鍍鋅片、銅片、鋁片、不銹鋼片
●APPLICATIONS：Any
type of heating freezing of gases and condense
industries, for example, electronics, plastic formation,
food, dyeing and printing, painting, paper making,
environmental protection, solvent recycling, waste
thermal recycling, motor freezing system, and air
conditioning. For example, VOC condenser, DOP
recycling, drying furnace, dryers, spreading
machines, foaming machines, velvet machines, glove
machines, resin molding machines, incinerators,
chilled water coil, and steam coil.
●FEATURES：By means of fin exothermic tube, heat is absorbed from
high-temperature fluids. Heat the low-temperature fluids.
Fins are circled round the heat conducting pies to
increase the surface area of heat conducting tube, which
is called screw type. If mold film is shaped and fixed by
pipe expansion, this is called film plain type. Both increase
the surface area of heat conduction to achieve the heat
exchange among fluids. Together with fins, this can
reduce the volume of heat exchange. But this depends on
the uses. Generally speaking, this can consist of heating
(heat source is steam or heat coal, that is; air is heated to
obtain thermal dry materials or the steam is frozen by
heating coal.) Freezing (cooler source is water or cooling
water, freezing source achieves air cooling and
condense.)
●SPECIFICATIONS：
Plain film type:pipe diameter:5/8ø
distance of pipe aperture:38.1×33(mm)
material:purple copper pipe, stainless steel
fin:thick: 0.15~0.25(mm)
material:aluminum, copper, stainless steel, tin plating of copper
Screw type:fins thick:0.3~0.4(mm)
material:plating zinc, copper, aluminum, stainless steel
